Coalescer and Separator Cartridges for effective removal of trace amounts of aqueous solutions from a liquid hydrocarbon stream

Provided in the Winston/Royal Guard Type 62-CC-2S Liquid-Liquid Coalescer Separator for effective separation of two immiscible liquids such as water from a hydrocarbon.  Applications include removing small amounts of water from oil, condensates, kerosene, gasoline, diesel and other liquid products in the refining, petrochemical, and oil and gas industries.

 

Operating Specifications:

  • PH range: 5 – 9
  • Recommended differential pressure for cartridge change-out: 15 P.S.I.
  • Recommended maximum operating temperature: 250 ⁰ F.
  • Buna-N gaskets are standard
  • Tinned steel core and optional end cap with bolting hole
WCTL6--R Series:

The first stage coalescer cartridge coalesces the dispersed phase into droplets large enough for most to drop out of the continuous phase and fall to the bottom of the vessel by gravity.

  • Fiberglass media with cotton sock exterior wrap
  • Flow direction is inside to out
  • Removes extremely fine solid particulates
  • Micron ratings:  0.5, 1, 5, 10, or 25
  • Effluent remnant:  10 ppm

WCTL6--R Series Standard Part Numbers and Dimensions:

  • WCTL611R 6” O.D. -- 11” Long -- 3-1/2” I.D.
  • WCTL614R 6” O.D. -- 14-1/4” Long -- 3-1/2” I.D.
  • WCTL622R 6” O.D. -- 22” Long -- 3-1/2” I.D.
  • WCTL628R 6” O.D. -- 28-3/4” Long -- 3-1/2” I.D.
  • WCTL633R 6” O.D. -- 33-1/4” Long -- 3-1/2” I.D.
  • WCTL636R 6” O.D. -- 36” Long -- 3-1/2” I.D.
  • WCTL644R 6” O.D. -- 44” Long -- 3-1/2” I.D.
  • WCTL656R 6” O.D. -- 56” Long -- 3-1/2” I.D.
 WCTL6--PC Series:                                                     

The second stage separator cartridge is hydrophobic, allowing hydrocarbon to pass through the pleated media while repelling small water droplets that do not have enough mass to initially drop out of the flow.

  • Silicone treated cellulose media.
  • Flow direction is outside to in.
  • 5 micron rating.

WCTL6--PC Series Standard Part Numbers and Dimensions:

  • WCTL611PC……..6” O.D -- 11-1/4” Long -- 3-1/2” I.D.
  • WCTL614PC……..6” O.D -- 14-1/2” Long -- 3-1/2” I.D.
  • WCTL616PC……..6” O.D -- 16-1/2” Long -- 3-1/2” I.D.
  • WCTL622PC……..6” O.D -- 22-1/4” Long -- 3-1/2” I.D.
  • WCTL628PC……..6” O.D – 28-1/4” Long -- 3-1/2” I.D.

Note:  Connectors are available for stacking the WCTL6--PC cartridges.